Problem with arduino in Fedora 12

by Kushal Das

Binary sketch size: 892 bytes (of a 30720 byte maximum)
/home/kdas/code/arduino/arduino-0018/hardware/tools/avrdude -C/home/kdas/code/arduino/arduino-0018/hardware/tools/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P/dev/ttyUSB0 -b57600 -D -Uflash:w:/tmp/build6600949432041572401.tmp/Blink.cpp.hex:i


avrdude: Version 5.10, compiled on Feb 19 2010 at 10:03:26
Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright © 2007-2009 Joerg Wunsch

System wide configuration file is “/home/kdas/code/arduino/arduino-0018/hardware/tools/avrdude.conf”
User configuration file is “/home/kdas/.avrduderc”
User configuration file does not exist or is not a regular file, skipping

Using Port : /dev/ttyUSB0
Using Programmer : stk500v1
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding

avrdude done. Thank you.


Any clue how to fix this ?